Crestron TPS-6X Series Operation Manual page 35

Crestron TPS-6X Series
Operations Guide – DOC. 6875C
CRESNET
Touch CRESNET to enter the "CRESNET SETUP" menu.
"CRESNET SETUP" Menu
The "CRENSET SETUP" menu has – and + controls to set the Cresnet ID and a
Connection Status indicator to show when the Cresnet connection is active.
Touch RETURN to go back to the main "COMMUNICATIONS" menu. After
communications parameters have been set, touch RETURN to go back to the
'SETUP MODE" menu or MAIN MENU.
TOUCH PANEL
From the "SETUP MODE" menu, touch the TOUCH PANEL button to enter the
"TOUCHPANEL" menu.
"TOUCHPANEL" Menu
The "TOUCHPANEL" menu offers access to "BACKLIGHT SETUP" and
"GRAPHICS SETUP" menus as well as a series of – and + controls to set the Power
Timeout (when the touch screen is undocked), Button Backlight Timeout and Standby
Timeout. Buttons are also provided to enable/disable Power up on last page, which
causes the touch screen to boot up to the last page it was on before shut down,
Isys 5.7" Wireless Touch Screens
Isys 5.7" Wireless Touch Screens: TPS-6X Series • 31