D-Link xStackTM DGS-3300 User Manual page 66

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#show log index 1-4
Command: show log index 1-4
Index Date
----- ----------
4 2000-03-02 01:54:53 Port 1:13 link up, 100Mbps FULL duplex
3 2000-03-02 01:54:53 Spanning Tree Protocol is enabled
2 2000-03-02 01:54:53 Unit 1, System started up
1 2000-02-28 06:06:09 Spanning Tree Protocol is disabled
DGS-3324SRi:4#
enable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To the syslog function on the Switch:
DGS-3324SRi:4#enable syslog
Command: enable syslog
Success.
DGS-3324SRi:4#
disable syslog
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the syslog function on the Switch:
Time Log Text
-------- -----------------------------------------------------
Used to enable the system log to be sent to a remote host.
enable syslog
The enable syslog command enables the system log to be sent
to a remote host.
None.
Only administrator-level users can issue this command.
Used to disable the system log function on the Switch.
disable syslog
The disable syslog command disables the system log function on
the Switch. After disabling, Syslog entries will no longer be sent to
a remote host.
None.
Only administrator-level users can issue this command.
63