Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show ipmc
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example
To display the current IP multicast interface table by DVMRP entry:
DGS-3324SRi:4#show ipmc protocol dvmrp
Command: show ipmc protocol dvmrp
Interface Name
---------------
System
Total Entries: 1
DGS-3324SRi:4#
Used to display the IP multicast interface table.
show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim}
This command will display the current IP multicast interface table.
<ipif_name 12> − The name of the IP interface for which to display the
IP multicast interface table for.
protocol − Allows the user to specify whether or not to use one of the
available protocols to display the IP multicast interface table. For
example, if DVMRP is specified, the table will display only those
entries that are related to the DVMRP protocol.
inactive – Specifying this parameter will display entries that are
•
currently inactive.
dvmrp – Specifying this parameter will display only those entries
•
that are related to the DVMRP protocol.
pim - Specifying this parameter will display only those entries
•
that are related to the PIM protocol.
None.
IP Address
Multicast Routing
---------------
----------------
10.90.90.90
DVMRP
317
Advertisement
Table of Contents
