D-Link xStackTM DGS-3300 User Manual page 191

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show ssl
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SSL status on the Switch:
DGS-3324SRi:4#show ssl
Command: show ssl
SSL status
RSA_WITH_RC4_128_MD5
RSA_WITH_3DES_EDE_CBC_SHA
DHE_DSS_WITH_3DES_EDE_CBC_SHA
RSA_EXPORT_WITH_RC4_40_MD5
DGS-3324SRi:4#
Example usage:
To view certificate file information on the Switch:
DGS-3324SRi:4# show ssl certificate
Command: show ssl certificate
Loaded with RSA Certificate!
DGS-3324SRi:4#
download certificate_fromTFTP
Purpose
Syntax
Description
Parameters
Used to view the SSL status and the certificate file status on the
Switch.
show ssl {certificate}
This command is used to view the SSL status on the Switch. Adding
the certificate parameter will allow the user to view the certificate file
information currently set on the Switch.
{certificate} – Adding this parameter will allow the user to view
certificate file information currently implemented on the Switch.
None.
Used to download a certificate file for the SSL function on the
Switch.
download certificate_fromTFTP <ipaddr> certfilename
<path_filename 64> keyfilename <path_filename 64>
This command is used to download a certificate file for the SSL
function on the Switch from a TFTP server. The certificate file is a
data record used for authenticating devices on the network. It
contains information on the owner, keys for authentication and digital
signatures. Both the server and the client must have consistent
certificate files for optimal use of the SSL function. The Switch only
supports certificate files with .der file extensions.
<ipaddr> - Enter the IP address of the TFTP server.
188
Disabled
0x0004 Enabled
0x000A Enabled
0x0013 Enabled
0x0003 Enabled