Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30
Success.
DGS-3324SRi:4#
show sntp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNTP configuration information:
DGS-3324SRi:4#show sntp
Command: show sntp
Current Time Source : System Clock
SNTP : Disabled
SNTP Primary Server
SNTP Secondary Server : 10.1.1.2
SNTP Poll Interval
DGS-3324SRi:4#
config time
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
Used to display the SNTP information.
show sntp
This command will display SNTP settings information including the
source IP address, time and poll interval.
None.
Only administrator-level users can issue this command.
: 10.1.1.1
: 720 sec
Used to manually configure system time and date settings.
config time date <date ddmthyyyy> <time hh:mm:ss>
This will configure the system time and date settings. These will
be overridden if SNTP is configured and enabled.
date – Express the date using two numerical characters for the
day of the month, three alphabetical characters for the name of
the month, and four numerical characters for the year. For
example: 03aug2003.
time – Express the system time using the format hh:mm:ss, that is,
two numerical characters each for the hour using a 24-hour clock,
the minute and second. For example: 19:42:30.
Only administrator-level users can issue this command. Manually
configured system time and date settings are overridden if SNTP
support is enabled.
258
Advertisement
Table of Contents
