Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
create account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an administrator-level user account with the username "dlink".
DGS-3324SRi:4#create account admin dlink
Command: create account admin dlink
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
DGS-3324SRi:4#
config account
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the user password of "dlink" account:
Used to create user accounts.
create [admin | user] <username 15>
The create account command is used to create user accounts
that consist of a username of 1 to 15 characters and a password
of 0 to 15 characters. Up to 8 user accounts can be created.
admin <username> - Entering this parameter will give the
specified user administrative-level privileges over configuring
functions of the Switch. This user may perform any function listed
in this manual. A username of up to 15 characters must be
created with this command to identify the admin user.
user <username> - Entering this parameter will give the specified
user user-level privileges over configuring functions of the Switch.
User-level privileges limit the execution of many commands listed
in this manual. A username of up to 15 characters must be
created with this command to identify the user.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Used to configure user accounts
config account <username>
The config account command configures a user account that
has been created using the create account command.
<username>- Enter the username of the account to be configured.
Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 15 characters.
11
Advertisement
Table of Contents
