D-Link xStackTM DGS-3300 User Manual page 297

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config dvmrp
Restrictions
Example Usage:
To configure DVMRP configurations of IP interface System:
DGS-3324SRi:4#config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Command: config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Success
DGS-3324SRi:4#
enable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable DVMRP:
disable dvmrp
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable DVMRP:
neighbor_timeout <second 1-65535> − The time period for
which DVMRP will hold Neighbor Router reports before issuing
poison route messages. The default value is 35 seconds.
state [enable | disable] − Allows DVMRP to be enabled or
disabled.
Only administrator-level users can issue this command.
Used to enable DVMRP.
enable dvmrp
This command, in combination with the disable dvmrp
command below, to enable and disable DVMRP on the Switch.
None.
Only administrator-level users can issue this command.
DGS-3324SRi:4#enable dvmrp
Command: enable dvmrp
Success.
DGS-3324SRi:4#
Used to disable DVMRP.
disable dvmrp
This command, in combination with the enable dvmrp
command above, to enable and disable DVMRP on the Switch.
None.
Only administrator-level users can issue this command.
294