D-Link xStackTM DGS-3300 User Manual page 22

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show serial_port
Parameters
Restrictions
Example usage:
To display the serial port setting:
DGS-3324SRi:4#show serial_port
Command: show serial_port
Baud Rate
Data Bits
Parity Bits
Stop Bits
Auto-Logout
DGS-3324SRi:4#
config serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure baud rate:
None.
None.
: 115200
: 8
: None
: 1
: 10 mins
Used to configure the serial port.
config serial_port {baud_rate [115200] | auto_logout [never |
2_minutes | 5_minutes | 10_minutes | 15_minutes]}
This command is used to configure the serial port's baud rate
and auto logout settings.
baud_rate [115200] − The serial bit rate that will be used to
communicate with the management host. This parameter is fixed
at 115200.
auto_logout – The user may select a time period from the
following list which the Switch will automatically log out of the
serial port.
never − No time limit on the length of time the console can
•
be open with no user input.
2_minutes − The console will log out the current user if
•
there is no user input for 2 minutes.
5_minutes − The console will log out the current user if
•
there is no user input for 5 minutes.
10_minutes − The console will log out the current user if
•
there is no user input for 10 minutes.
15_minutes − The console will log out the current user if
•
there is no user input for 15 minutes.
Only administrator-level users can issue this command.
19