D-Link xStackTM DGS-3300 User Manual page 287

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show bootp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display bootp relay status:
DGS-3324SRi:4#show bootp_relay
Command: show bootp_relay
Bootp Relay Status
Bootp Hops Count Limit
Bootp Relay Time Threshold : 0
Interface
------------
System
Total Entries: 1
DGS-3324SRi:4#
Used to display the current BOOTP relay configuration.
show bootp_relay {ipif <ipif_name 12>}
This command will display the current BOOTP relay configuration
for the Switch, or if an IP interface name is specified, the BOOTP
relay configuration for that IP interface.
<ipif_name 12> − The name of the IP interface for which to display
the current BOOTP relay configuration.
None.
: Disabled
: 4
Server 1 Server 2
--------------- ---------------
10.48.74.122 10.23.12.34
Server 3 Server 4
--------------- --------------
10.12.34.12 10.48.75.121
284