D-Link xStackTM DGS-3300 User Manual page 231

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
delete access_profile
Parameters
Restrictions
Example usage:
To delete the access profile with a profile ID of 1:
DGS-3324SRi:4# delete access_profile profile_id 1
Command: delete access_profile profile_id 1
Success.
DGS-3324SRi:4#
show access_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display all of the currently configured access profiles on the Switch:
DGS-3324SRi:4#show access_profile
Command: show access_profile
Access Profile Table
Access Profile ID: 1
======================================================================
MASK Option :
VLAN
-----------
Access ID : 1
Ports: 1:1
----------- ------
Trinity 1
profile_id <value 1-8> − Enter an integer between 1 and 8 that is
used to identify the access profile that will be deleted with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Only administrator-level users can issue this command.
Used to display the currently configured access profiles on the
Switch.
show access_profile {profile_id <value 1-8>}
The show access_profile command is used to display the
currently configured access profiles.
profile_id <value 1-8> − Enter an integer between 1 and 8 that is
used to identify the access profile that will be viewed with this
command. This value is assigned to the access profile when it is
created with the create access_profile command.
Entering this command without the profile_id parameter will
command the Switch to display all access profile entries.
Only administrator-level users can issue this command.
802.1p
------
Mode: Permit(replaced) priority: 1
TYPE : Ethernet
228