D-Link xStackTM DGS-3300 User Manual page 207

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4# config radius 1 ipaddress 10.48.74.121 key dlink
Command: config radius 1 ipaddress 10.48.74.121 key dlink
Success.
DGS-3324SRi:4#
show radius
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display RADIUS settings on the Switch:
DGS-3324SRi:4#show radius
Command: show radius
Idx
----- ------------------
1
2
3
Total Entries : 3
DGS-3324SRi:4#
show acct_client
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the current RADIUS accounting client:
Used to display the current RADIUS configurations on the Switch.
show radius
The show radius command is used to display the current
RADIUS configurations on the Switch.
None.
None.
IP Address Auth-Port
Number
---------
10.1.1.1 1812
20.1.1.1 1800
30.1.1.1 1812
Used to display the current RADIUS accounting client.
show acct_client
The show acct_client command is used to display the current
RADIUS accounting client currently configured on the Switch.
None.
None.
Acct-Port Status
Number
--------- -----------
1813 Active
1813 Active
1813 Active
204
Key
------------
switch
des3226
dlink