Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#show vlan
Command: show vlan
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
VID
VLAN TYPE
UserDefinedPid
Encap
Member ports
Static ports
Untagged ports
Forbidden ports :
Total Entries : 2
DGS-3324SRi:4#
show gvrp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display GVRP port status:
: 1
: 1QVLAN
:
:
: 1:1-1:24,2:1-2:24
: 1:1-1:24,2:1-2:24
: 1:1-1:24,2:1-2:24
: 2
: PROTOCOL
:
:
: 1:1-1:24,2:1-2:24
: 1:24,2:24
:
Used to display the GVRP status for a port list on the Switch.
show gvrp {<portlist>}
This command displays the GVRP status for a port list on the
Switch.
<portlist> − Specifies a range of ports for which the GVRP status
is to be displayed. The port list is specified by listing the lowest
switch number and the beginning port number on that switch,
separated by a colon. Then the highest switch number, and the
highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are
separated by a dash. For example, 1:3 specifies switch number 1,
port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all
of the ports between switch 1, port 3 and switch 2, port 4 − in
numerical order.
None.
122
VLAN Name
: default
Protocol ID
:
Advertisement : Enabled
VLAN Name
: v1
Protocol ID
: ip
Advertisement : Enabled
Advertisement
Table of Contents
