D-Link xStackTM DGS-3300 User Manual page 311

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
DGS-3324SRi:4#config last_hop_spt_threshold 0
Command: config last_hop_spt_threshold 0
Success.
DGS-3324SRi:4#
show pim rpset
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To view the RP Set information:
DGS-3324SRi:4# show pim rpset
Command: show pim rpset
Bootstrap Router: 12.43.51.81
Group Address
---------------------
224.0.0.1/4
Total Entries: 1
DGS-3324SRi:4#
show pim crp
Purpose
Syntax
Description
Parameters
Restrictions
Usage Example:
To view the CRP settings:
DGS-3324SRi:4# show pim crp
Command: show pim crp
PIM Candidate-RP Table
Used to display the RP Set of the Switch.
show pim rpset
This command will display the information regarding the RP Set
learned by the BSR. This command is for PIM-SM configurations
only.
None.
None.
RP Address Holdtime
--------------------- ----------------
31.43.51.81 150
Used to display the Candidate RP settings on the Switch, along
with CRP parameters configured for the Switch.
show pim crp
This command will display the settings for Candidate RPs that are
accessible to the switch. This command is for PIM-SM
configurations only.
None.
Only administrator-level users can use this command.
308
Expired Time Type
------------------- -------------
107