Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
show module_info
Description
Parameters
Restrictions
Example usage:
To view information concerning the DEM-420X optional module added to an xStack DGS/DXS-3300 series switch.
DGS-3324SRi:4#show module_info
Command: show module_info
Box
ID
------
1
2
3
4
5
6
7
8
9
10
11
12
DGS-3324SRi:4#
show serial_port
Purpose
Syntax
Description
This command is used to view information about the DEM-420X and
DEM-420CX uplink modules added to an xStack DGS/DXS-3300
series. Currently, only the DXS-3326GSR and the DXS-3350SR
members of the xStack DGS/DXS-3300 series have the capability to
add the optional DEM-420X or DEM-420CX module. Although the
DGS-3324SR and the DGS-3324SRi do not support the optional
module, information about the module can be viewed on these
switches if they are stacked with one of the switches that support the
optional module.
The following explains what is presented in the window:
Box ID – The ID of the switch in the switch stack.
Module Name – The name of the optional module. Currently,
switches in the xStack DGS/DXS-3300 series only support the DEM-
420X and the DEM-420CX optional modules.
Rev. – The hardware revision of the optional module.
Serial No. – The serial number associated with this particular
optional module.
Description – A brief description of the optional module including
port count and module type.
None.
None.
Module Name Rev.
------------------
-------
DEM420X
2A1
DEM420CX
1A1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Used to display the current serial port settings.
show serial_port
This command displays the current serial port settings.
Serial
Description
No.
---------
-------------------------------------------
123456789 2-Port 10GE XFP Uplink Module
123454567 2-Port 10GE CX4 Uplink Module
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
18
Advertisement
Table of Contents
