D-Link xStackTM DGS-3300 User Manual page 174

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch CLI Manual
config authen server_group
Restrictions
Example usage:
To add an authentication host to server group "group_1":
DGS-3324SRi:4#config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Command: config authen server_group group_1 add server_host
10.1.1.121 protocol tacacs+
Success.
DGS-3324SRi:4#
delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
tacacs – Use this parameter to utilize the built-in TACACS
server protocol on the Switch. Only server hosts utilizing
the TACACS protocol may be added to this group.
xtacacs – Use this parameter to utilize the built-in
XTACACS server protocol on the Switch. Only server hosts
utilizing the XTACACS protocol may be added to this group.
tacacs+ – Use this parameter to utilize the built-in
TACACS+ server protocol on the Switch. Only server hosts
utilizing the TACACS+ protocol may be added to this group.
radius - Use this parameter to utilize the built-in RADIUS
server protocol on the Switch. Only server hosts utilizing
the RADIUS protocol may be added to this group.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group. This group may add any
combination of server hosts to it, regardless of protocol.
protocol – Enter the protocol utilized by the server host. There are
four options:
tacacs – Use this parameter to define the protocol if the
server host is using the TACACS authentication protocol.
xtacacs – Use this parameter to define the protocol if the
server host is using the XTACACS authentication protocol.
tacacs+ – Use this parameter to define the protocol if the
server host is using the TACACS+ authentication protocol.
radius – Use this parameter to define the protocol if the server host
is using the RADIUS authentication protocol.
Only administrator-level users can issue this command.
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command will delete an authentication server group.
<string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to delete.
Only administrator-level users can issue this command.
171