Printronix SL4M User Manual page 244

Appendix B
Using the Full Media Rewinder Option
Media
Media
Guide
Media Guide
Roller
Frame
Opening
NOTE: The alternate media path is for inside wound label.
3. Loosen the thumbscrew, pull it outward, position the wind direction lever
NOTE: Wind direction lever in lower position = clockwise rotation.
IMPORTANT
If you do not complete the following step, it will be extremely difficult to
remove the printed labels from the rewinder.
4. Remove the media rewinder clip.
5. Wrap the leading edge of the media around the rewinder.
6. Slide the media flush against the left edge of the rewinder.
244
Alternate Rewind Path
NOTE: The wind direction lever
(not shown) is located behind
the thumbscrew.
Figure 13. Media Rewind Path
in the desired location, and tighten the thumbscrew. See Figure 13.
Wind direction lever in upper position = counterclockwise rotation.
Rewinder
Thumbscrew
Rewinder Full
Sensor
Alternate
Media Path
Sensor
Thumbscrew