Printronix SL4M User Manual page 125

•
Subnet Mask. This item allows you to set the Subnet Mask for the
TCP/IP protocol in four three-digit segments (SEG1 through SEG4). If the
Subnet Mask is assigned by BootP, Arp or DHCP, it is dynamic and
read-only.
The defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
After specifying a Subnet Mask, you are prompted to:
↵
Press to Save & Exit
Press to Exit
Press to Edit.
NOTE: When changing the Subnet Mask, the printer resets the NIC when the
printer is placed online. When the printer resets the NIC, the LCD
displays DO NOT POWER OFF. The printer will then reboot to re-
establish communication with the NIC.
•
Gateway Address. This item allows you to set the Gateway Address for
the TCP/IP protocol in four three-digit segments (SEG1 through SEG4). If
the Gateway Address is assigned by BootP, ARP or DHCP, it is dynamic
and read-only.
The defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
The defaults for the SEG1 through SEG4 are 000, 000, 000, and 000.
After specifying a Gateway address, you are prompted to:
↵
Press to Save & Exit
Press to Exit
Press to Edit.
NOTE: When changing the Gateway Address, the printer resets the NIC
when the printer is placed online. When the printer resets the NIC, the
LCD displays DO NOT POWER OFF. The printer will then reboot to
re-establish communication with the NIC.
•
MAC Address. This item is the Manufacturer's Assigned Number, and is
unique for the NIC and the Wireless option. It is read-only.
•
IP Assignment
•
DHCP. You can enable/disable the DHCP protocol using this option,
but consult your administrator for the appropriate setting.
The options are Enable (factory default) and Disable.
NOTE: When changing the DHCP, the printer resets the NIC when the printer
is placed online. When the printer resets the NIC, the LCD displays
DO NOT POWER OFF. The printer will then reboot to re-establish
communication with the NIC.
INTERFACES Submenus
125