Using the Full Media Rewinder with 3 Inch Diameter Core
Adapters
Using the full media rewinder with 3 inch diameter core adapters allows you to
automatically rewind printed labels onto a 3 inch diameter media take-up core
after they have been printed.
Configure the Printer Menu
1. Set Media Handling to Rewind in the MEDIA SETUP menu.
2. Calibrate the printer (see "Running Auto Calibrate" on page 47).
Install the Core Adapters and Media Take-Up Core
1. Slide the inside core adapter onto the rewinder until it is flush against the
2. Tighten the thumbscrew.
(See "Configuring the Printer" on page 61 for more information.)
A
Figure 15. Installing the Inside Core Adapter
rewinder flange.
Configure the Printer Menu
A
Rewinder
Flange
Thumbscrew
Rewinder
Inside Core Adapter
247