Printronix SL4M User Manual page 127

•
Antenna. The type of antenna used:
•
Primary (factory default). Select when you want to use the Primary
antenna on the server.
•
Auxiliary. Select when you want to use the Auxiliary antenna on the
server.
•
Power Mgmt. This allows you to set power-save mode and sleep time. A
value specifying the sleep time in milliseconds will be provided. If set to
zero, power-save mode will be disabled.
The range is 0-1000 ms., and the factory default is 0 ms.
•
Transmit Power. The power level as a percentage of full power.
The range is 0 - 100%, and the factory default is 100%.
•
Internat. Mode. When enabled, the Wireless option adapts to
international frequency requirements in Europe.
The options are Disable (factory default) and Enable.
•
EAP Mode. This selects the EAP authentication method.
•
LEAP selects Cisco LEAP authentication.
•
PEAP selects PEAP authentication.
•
TTLS selects TTLS authentication.
•
None (factory default) disables EAP authentication.
•
EAP Username
•
EAP Username (01-15). The first 15 characters of the EAP user
name (maximum number of characters is 32).
•
EAP Username (16-30). Characters 16 to 30 of the EAP user name
(maximum number of characters is 32).
•
EAP User (31-32). Characters 31 to 32 of the EAP password
(maximum number of characters is 32).
•
Reset EAP User
Resets the EAP user name to an empty string.
•
EAP Password
•
EAP Password (01-15). The first 15 characters of the EAP password
(maximum number of characters is 32).
•
EAP Password (16-30). Characters 16 to 30 of the EAP password
(maximum number of characters is 32).
•
EAP Password (31-32). Characters 31 to 32 of the EAP password
(maximum number of characters is 32).
•
Reset EAP Pswd
Resets the EAP password to an empty string.
INTERFACES Submenus
127