Printronix SL4M User Manual page 217

Displayed Message
TESTING HARDWARE
PLEASE WAIT
↵
THE KEY IS
LOCKED
↵
THE KEY IS
UNLOCKED
↵
To Stop Press
Table 16. Status Messages
Can User
Explanation
Correct?
Yes Normal power-up
message. Printer is
running its initialization
routine.
Yes A momentary status
message that appears
when an attempt is
made to change a
menu option or perform
a diagnostic print test.
By default, the
↵
(Enter) key is locked
when the printer
powers on.
Yes A momentary status
message that appears
↵
when the
is unlocked, permitting
configuration
parameters to be
changed.
N/A Normal message when
a test print pattern that
will run continuously is
printing.
Status Messages
Solution
No action required.
1. Unlock the Enter
key by pressing
DOWN +
same time. (This
is the factory
default key
combination.)
2. A different unlock
key combination
will be in affect if
the Set Lock Key
option in the
Printer Setup
menu was used.
1. No action is
necessary if you
want the
(Enter) key
unlocked.
2. Press the DOWN
↵
+ keyat the
same time if you
want to lock the
↵
key.
Press the
key to stop printing
the test pattern.
↵
at the
↵
key
↵
(Enter)
217