Media
7. Insert the media rewinder clip to secure the media. See Figure 14.
8. Manually rotate the rewinder one full revolution until the media is taut.
9. Install the media retainer onto the rewinder until it is flush against the
liner.
10. Tighten the thumbscrew
11. Rotate the deck lock lever clockwise to close the pivoting deck.
12. Press the
TOF (Top-of-Form) position.
13. Press the
14. Close the side cover and media cover.
IMPORTANT
The rewinder supports a maximum diameter of 8 inches of printed labels
(including rewinder diameter). Exceeding this diameter can cause
printed labels to rub on the bottom pan.
Rewinder
Figure 14. Securing Media on the Rewinder
(Feed) key to advance the media to the next
(Pause) key until ONLINE displays.
Media Rewinder
Clip
Thumbscrew
Load Media
Media
Retainer
245