7. Press the ↵ key to select Enable. An asterisk appears after Enable.
Setting Admin User to Enable allows the user to see hidden submenus.
. .
8. Press the
key go to the main menu.
.
9. Press the Right key until the following displays:
CONFIGURATION
↵
10. Press the
key to enter the CONFIGURATION menu.
11. Press the Down key until the following message displays:
Power-Up Config.
Factory*
12. Press the Left or Right keys to cycle through the options (1-8 and
Factory). When the desired number displays, press the ↵ key to select it.
The following message displays:
Power-Up Config.
X*
NOTE: If the configuration number has not been saved previously, the
following error message displays:
CONFIG. DOES NOT
EXIST/Save First
If this error message displays, see "Saving a Configuration" on
page 148. Once you have saved a configuration, repeat the steps in
this procedure.
DIAGNOSTICS Submenus
151