Table of Contents
Advertisement
Name
(3)
Audio Out
(4)
CH1
(5)
CH2
(6)
CH3
(7)
CH4
(8)
Video Out
(9)
VGA OUT
(10) Sensor In &
Alarm Out
(11) TV-VGA Switch
(12) 12V DC
1.5
Setting Up the DVR Unit
1.5.1 Installing the Hard Disk
The DVR unit allows user to install one hard disk. Before installing the hard disk,
make sure to set the hard disk master jumper setting. Adjust the jumper setting
according to the instructions on the hard disk label.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws
Function
:
Output the audio signal to a audio out device which it has a power
supply by itself
The audio input device needs to be powered by
i
external power.
:
Input the video camera signal and display it on channel 1
:
Input the video camera signal and display it on channel 2
:
Input the video camera signal and display it on channel 3
:
Input the video camera signal and display it on channel 4
:
Output the video signal to other video output device through BNC
port
The DVR unit support 2 video output ports and you can
only select to output the video either from the VGA OUT or
VIDEO OUT
:
Output the video signal to a CRT or LCD monitor
:
Support up to 4 sensor device and 1 relay device (Relay: 1A @
125V AC/30V DC)
:
Switch to select the video output. Make sure to set the video output
before turning on the unit
:
Connect the power adapter into this port
3
2. Push the cover backward and lift
Advertisement
Table of Contents
