Ir Remote Control - HIKVISION DS-7604 Series User Manual

User Manual of DS-7604 Series DVR
• STATUS: the indicator lights when the compound key switches to numeric/letter input
mode.
• Tx/Rx: TX/RX indictor flickers green when network connection is functioning normally.
IR Receiver:
operation by IR remote control.
Compound Buttons:
• 1MENU: (1) Enter numeral "1"; (2) Access the main menu interface.
• 2ABC/F1: (1) Enter numeral "2"; (2) Enter letters "ABC"; (3) The F1 button when used
in a list field will select all items on the list. In PTZ Control mode, it will turn on/off
PTZ light.
• 3DEF/F2: (1) Enter numeral "3"; (2) Enter letters "DEF"; (3) The F2 button is used to
cycle through tab pages. It will also bring up the Channel & OSD Position settings.
• 4GHI/ESC: (1) Enter numeral "4"; (2) Enter letters "GHI"; (3) Exit and back to the
previous menu.
• 5JKL/EDIT: (1) Enter numeral "5"; (2) Enter letters "JKL"; (3) Delete characters before
cursor; (4) Select the checkbox and ON/OFF switch; (5) Start/stop record clipping in
playback.
• 6MNO/PLAY: (1) Enter numeral "6"; (2) Enter letters "MNO"; (3) Playback, for direct
access to playback interface.
• 7PQRS/REC: (1) Enter numeral "7"; (2) Enter letters "PQRS"; (3) Access Quick
Schedule Configuration interface.
• 8TUV/PTZ: (1) Enter numeral "8"; (2) Enter letters "TUV"; (3) Access PTZ control
interface.
• 9WXYZ/PREV: (1) Enter numeral "9"; (2) Enter letters "WXYZ"; (3) Multi-camera
display in preview.
• 0/A: (1) Enter numeral "0"; (2) switch between input methods (upper and lowercase
alphabet, symbols and numeric input).
• SHIFT: Switch of compound keys between the numeric/letter input and functional
control.
Control Buttons:
• Directional buttons: In menu mode, the direction buttons are used to navigate between
different fields and items and select setting parameters. In playback mode, the Up and
Down buttons are used to speed up and slow down record play, and the Left and Right
buttons are used to select the recording 30s forwards or backwards. In preview mode,
these buttons can be used to cycle through channels.
• Enter: The Enter button is used to confirm selection in menu mode; or used to select
checkbox fields and ON/OFF switch. In playback mode, it can be used to play or to
pause the video. In single-frame play mode, pressing the Enter button will advance the
video by a single frame. And in auto sequence preview mode, the buttons can be used
to pause / resume auto sequence.
USB Interface: Connects USB mouse or USE flash memory devices.

IR Remote Control

Your DVR may also be controlled with the included IR remote control, shown in Figure 5.
Batteries (2XAAA) must be installed before operation.
12