First Choice For Security Professionals Quick Start Guide DS-7600NI-SE/P Series NVR NOTE: For more detailed information, refer to the User’s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvisionusa.com...
First Choice For Security Professionals Quick Start NOTE: Connect VGA monitor and mouse before starting. 1. Overview 2. Connection 3. Startup/Shutdown 4. Formatting a Disk 5. Setting Date & Time 6. Recording 7. Playback 8. Backup 9. Network Connection 10. Adding IP Cameras (UPNP available) NOTE: For more detailed information, refer to the User’s Manual on the CD-ROM.
Network Video Recorder 1. Overview BEFORE STARTING: Connect VGA monitor and mouse (mouse supplied). Check that your package includes the following: Hybrid/Analog DVR Mouse IR Remote Power Cord Screws Hard Drive (PreInstalled) HDD Cables Quick Start Guide Manual/Software CD Front Panel Description: 1.
First Choice For Security Professionals 2. Connection Internet Speaker VGA Monitor HDMI Monitor Router Ethernet USB Mouse Keyboard IR Remote Alarm Alarm Input Output IP Camera Audio Input USB Device IP Dome Analog Dome Analog Camera IP Dome IP Camera NOTE: DS-7600NI-SE/P Series NVR supports only IP cameras.
First Choice For Security Professionals 3. Startup and Shutdown (cont.) To Shut down Your DVR: 1. Enter the Shutdown menu by going to Main Menu > Maintenance. 2. Click to access the Shutdown menu. 3. Select the Shutdown button. 4. Click the Yes button. 4.
Network Video Recorder 4. Formatting a Disk (cont.) 3. Click the Init button. 4. A confirmation message will appear on the screen. Click the Yes button to continue formatting process. 5. The status column will show the Initialization progress. After the disk has been formatted, the status of the disk will change to Normal.
Page 7
First Choice For Security Professionals 6. Recording To Setup Recording Schedule: You can set the recording schedule through two ways: OPTION1: Right click to access the menu. Select Start Recording from the list, select either Continuous Record or Event Record. This will apply a 24/7 recording for all active channels.
Page 8
First Choice For Security Professionals 7. Playback Playback from Search: 1. Enter the Playback menu by going to Main Menu > Playback. 2. Select the camera and date you want to search. 3. The search results will be shown on the timeline with blue bars designating recorded files.
Page 9
Network Video Recorder 8. Backup Backup Recorded Files (Export): 1. Enter the File Management menu by going to Main Menu > File Management 2. Place a check next to the cameras you want to search files for backup. Select the recording type, date and time range you want to backup.
Network Connection Using Web Browsers All Hikvision products use the default IP address of 192.0.0.64 1. Connect a CAT5 or CAT6 cable from the NVR to a PC or Laptop computer. Note your laptop or PC computers existing address, such as: 192.0.0.62...
IP address are listed. Note: 1) For HIKVISION IP camera, to use Plug-and Play, user just need to plug the camera. 2) For third-party IP camera, please make sure it supports ONVIF protocol, SADP search of ONVIF. Also, user name and password should be admin/12345, IP address should be in the same segment of POE switch NIC IP address(192.168.254.1 is default IP address).
Page 12
First Choice For Security Professionals 908 Canada Court City of Industry, CA 91748 U.S.A. www.hikvisionusa.com...
Need help?
Do you have a question about the DS-7600NI-P and is the answer not in the manual?
Questions and answers