Deleting A User; Editing A User - HIKVISION DS-7604 Series User Manual

User Manual of DS-7604 Series DVR
3. Once a new entry has been selected, the fields under Users will become editable. Enter the
information for Name, Password and Verify.
4. In the Remote Permissions panel, select the functions that you would like to give the user access
remotely. You may also check the All checkbox to give full control to the selected remote user.
These functions include:
•
Log Search: View logs that are saved on the DVR.
•
Serial Port Control: Configure settings for RS232 and RS485 ports.
•
Two-Way Audio: Ability to use two-way radio between the remote client and the DVR.
•
Advanced Control: Manage hard disk drives (initializing and setting properties for HDDs).
Ability to remote update system firmware and stopping of the relay output.
•
Live View: Access the Live Feed.
•
PTZ Control: Control PTZ cameras.
•
Configuration: Configure parameters, restore parameters to factory defaults and import
settings to as well as export settings from DVR.
•
Video Output Control: Configure settings for video output.
•
Alarm Control: Alert or control the relay output of the DVR. Alarm and exception settings
must be configured properly to upload to host.
•
Shutdown/Reboot: Shutdown or reboot the DVR.
•
Playback: Playback recordings remotely.
•
Camera Management: Enable and disable analog channels. Add and delete IP cameras.
•
All: Full permission to use all functions.
5. Click the Save button to save user settings and click Done to return to the previous menu.
Note:
Users both have the local access permission and the remote access permission.
Note:
The remote permission configuration is used for remote login. If you use the account (like guest) for local
login, you still have all the permissions.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Note:
User settings only appear on the list of System Configuration when login with Administrator accounts.
Note:
You can go to Lock Menus menu easily by clicking the‟ Lock menus‟ button on the bottom of the User
setting menu.

Deleting a User

To delete a user from the DVR:
1. Enter the User Settings menu, shown in Figure 36 by going to Main Menu > System Configuration >
User Settings.
2. Select a user to delete in the Users List panel.
3. Click the Remove button to delete user.
4. Click the OK button to confirm deletion of user.
5. Click the Done button to exit menu.

Editing a User

To edit a user:
48