HIKVISION DS-7604 Series User Manual page 25

User Manual of DS-7604 Series DVR
If the selected camera is a PTZ camera, you may control it directly from the display. Control a PTZ
camera as following steps:
Steps:
1. Select display that corresponds to a PTZ camera.
2. Click the PTZ Control icon. This will bring up additional PTZ control buttons, as shown in
Figure 15.
3. Control the PTZ using PTZ control buttons. Pan and tilt PTZ by clicking on the directional
buttons. Zoom in and out using the Zoom In/Out buttons and recall presets, patrols and patterns
by clicking the number next to the corresponding icons.
4. Click the Close icon to return to Live Feed mode.
Note:
PTZ parameters for the camera must be set correctly before the PTZ can be controlled.
Note:
A maximum of five presets, patrols and patterns can be displayed on this interface. More presets, patrols
and patterns can be recalled in the PTZ Configuration menu.
Audio:
Enable/disable audio for selected display. To enable or disable audio:
1. Select display to enable/disable audio.
2. Enable audio by clicking the Enable Audio icon and disable audio by clicking the Disable Audio
icon. An error message similar to the one shown in Figure 16 will pop up if the Enable Audio
option is not selected in the Display Configuration menu for the specified channel.
Digital Zoom Mode:
Figure 15. PTZ Control Mode
Figure 16. Enable Audio Error Window
25