Backing Up Video Clips - HIKVISION DS-7604 Series User Manual

User Manual of DS-7604 Series DVR
5. Select the ending position of the video clip.
6. Click the stop Clip button.
7. The selected video clip time range will be shown at the bottom of the Playback Interface, as seen
in Figure 31.
8. You may play the video clip using the Play Clip button or use the arrow keys shown next to the
clip time range to progress through the video one second, minute or hour at a time.
9. Click the Save Clip button to save clip to the DVR. Clip must be first saved to the DVR before it
can be backed up to an external USB storage device or to a DVD writer. Clicking the Clear Clip
button will remove the video clip.
10. Repeat steps 2-7 to select additional clips. If you would like to backup video clips at this point,
click the Backup button.
Note:
The Play Clip, Save Clip and Clear Clip buttons are not available unless a completed video clip is
selected. A completed video clip has a start and end point marked by using the Start Clip and End Clip
button.
Note:
The Start Clip button is not available when there is still a video clip that has not been saved or
cleared.

Backing up Video Clips

After video clips have been selected in the Playback Interface, you may back them up to an external USB
storage device or DVD writer by going to the Backup menu.
To backup video clips:
1. Enter the Clips Backup menu, shown in Figure 32 by first going to Main Menu > Playback. In the
Playback menu, click the Clips Backup button.
Figure 31. Video Clip Time Range
42