User Manual of DS-7604 Series DVR
1. Enter the User Settings menu, shown in Figure 36 by going to Main Menu > System Configuration >
User Settings
2. Select a user to edit in the Users List panel.
3. Edit user information in the Users and Remote Permissions panel. Remote permissions are defined
above in Adding a New Remote User on page 47.
4. Click the Done button to exit menu.
Note:
You can modify the password of Administrator in User setting menu.
Note:
User password can be both numbers and characters. You can click the button
on the password
editable fields to enter characters.
Switch User
Figure 37. Main Menu
On the main menu (see in Figure 37), information about users are show on the lower left corner,
, click
to switch users.
Configuring PTZ Cameras
Configuring Basic PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the
PTZ and RS-485 of the DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 38 by going to Main Menu > System
Configuration > PTZ Configuration.
49