User Manual of DS-7604 Series DVR
Configuring Cameras
Adding and Removing IP Cameras
Depending on the model of your DVR, IP cameras can be setup and used in conjunction with regular
analog cameras.
Before configuring IP cameras, please ensure the network settings for your DVR is properly setup.
To manage IP cameras:
1. Enter the Add/Remove Cameras menu, shown in Figure 47 by going to Main Menu > Cameras Setup >
Add/Remove Cameras.
Figure 47 Add/Remove Cameras > Analog Camera
2. Select the IPC tab.
3. Click the Discover button to automatically detect connected IP cameras on the network.
4. If the detected IP cameras and DVR are not on the same subnet, you can modify the cameras‟ IP
Address, Manage Port, Protocol and Administrator Password.
5. Click the Test Connection button to test if the IP camera was connected successfully or not.
6. Click the Add button to add the IP camera to the Added Cameras list, as shown in Figure 48.
Figure 48. Add/Remove Cameras > IPC Menu
59