HIKVISION DS-7604 Series User Manual page 54

User Manual of DS-7604 Series DVR
2. Select the Recording Triggers tab.
3. Select the camera to configure in the camera drop down menu on the upper left of the menu. If all
cameras are to be configured with the same settings, select All Cameras from the list.
4. Check the Enable Trigger Events checkbox to enable trigger events for the selected camera.
Uncheck the checkbox to disable trigger events.
5. Select the trigger inputs that you would like to associate with the selected camera.
6. Select the Save button to save the trigger settings and select Exit to return to the previous menu.
Selecting the Exit button without clicking Save will quit out of the menu without saving settings.
Certain actions can also be performed if an alarm input is triggered. To setup trigger actions:
1. Enter the Trigger Settings menu, shown in Figure 42 by going to Main Menu > Recording
Configuration > Trigger Settings.
2. Select the Trigger Actions tab; this will take you to the Trigger Actions submenu, shown in
Figure 43 and Figure 44.
Figure 42. Trigger Settings Menu
Figure 43. Trigger Actions Sub-Menu.
54