HIKVISION DS-7604 Series User Manual page 19

User Manual of DS-7604 Series DVR
2. Click the Time/Date button to enter the Time/Date menu (Figure 10).
3. The current system time and date as well as the time zone will be displayed. Using the directional
buttons on the front panel/remote or the mouse, select the correct date, time and time zone.
4. To enable Daylight Savings Time, click and check the Enable DST checkbox.
5. To acquire the time and date over an NTP (Network Time Protocol) Server, check the
Synchronize via NTP server checkbox. You may enter your own NTP server or select from one
of the default locations from the list of servers, as shown in Figure 11.
Figure 9. System Configuration Menu
Figure 10. Time/Date Menu
19