Managing System; Upgrading The System Firmware; Restoring Default Settings - HIKVISION DS-7604 Series User Manual

Ds-7604 series network digital video recorder

Hide thumbs Also See for DS-7604 Series:

Table of Contents

User Manual of DS-7604 Series DVR

Managing System

The system firmware for your DVR can be updated from a USB storage device.

To update the system firmware:

1. Enter the Firmware Upgrade menu, shown in Figure 60 by going to Main Menu > Maintenance >

Firmware Upgrade.

2. Connect the USB storage device to a USB port on the DVR.

3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.

4. Select the firmware file. The firmware file is named digicap.mav.

5. Click the Upgrade button to upgrade the DVR. The DVR will automatically reboot after the

upgrade is completed. If you do not wish to upgrade at this point, click the Cancel button.

To restore factory default settings to your DVR:

1. Enter the Factory Default menu, shown in Figure 61 by going to Main Menu > Maintenance >

Factory Default.

Figure 60. Firmware Upgrade Menu

Figure 61. Factory Default Menu

Table of Contents

Ds-7604hi-s