Replacing The Processor - Fujitsu Siemens Computers PRIMERGY TX200 S3 Options Manual

Replacing the processor

6.2 Replacing the processor
V
CAUTION!
Only processors of the same type may be used on the system board. The
second processor must have at least the same clock frequency as the
first processor. The server always configures itself to the lower clock
frequency of the two processors. For dual operation, use a suitable multi-
processor operating system.
Ê Open the server as described in the
Ê Remove the ventilation duct over the main memory (see
Ê Standard fans: Remove the standard fans (see
Ê Redundant fans: Remove the ventilation duct over the system fans (see
page 33).
Ê Remove the heat sink holder (see
Ê Redundant fans: Remove the processor fan holder (see
42
chapter "Preparation" on page
page 33).
Options Guide
Processors
page 28).
page 32).
page 35).
19ff.
TX200 S3