Fujitsu Siemens Computers PRIMERGY TX200 S3 Options Manual page 49

Accessible drives
Figure 35: Connecting the data cable on the system board
Ê Connect the data cable to the system board. You will find the connector near
to the connector of the floppy cable.
Ê Redundant fans: Reinstall the ventilation duct over the system fans (see
page 41).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX200 S3
Installing a slim line CD/DVD-ROM drive
93ff.
Options Guide 49