Replacing The Operating Panel Board - Fujitsu Siemens Computers PRIMERGY TX200 S4 Service Supplement Manual

Replacing the operating panel board

4.2 Replacing the operating panel board
Ê Open the server and remove the front cover or the rack front cover as
described in the
Ê Remove the system fan 1 as described in the
fan 1" on page
Ê Disconnect the operating panel cable from the connector Frontpanel on the
system board.
Figure 2: Releasing the upper hook
Ê Press the upper hook downward (see the arrow).
20
section "Preparation" on page
19.
Service Supplement
Replacement routines
17.
section "Removing the system
TX200 S4