Fujitsu Siemens Computers PRIMERGY TX200 S3 Options Manual page 90

Converting from the floorstand model to the rack model
Figure 74: Removing the feet
Ê Remove four screws from each of the feet.
Ê Remove the feet.
I
The feet are no longer required.
Haken
1
1
Figure 75: Removing the bar
Ê Remove the three screws (1) on the bar.
Ê Push the bar to the rear (2) until the hooks disengage.
Ê Remove the bar (3).
I
The bar is no longer required.
90
3
2
1
Options Guide
TX200 S3