Fujitsu Siemens Computers PRIMERGY TX200 S3 Options Manual page 87

Figure 72: Installing the PS safe guard
Ê Install the PS safe guard and fasten it with one screw M3x4.5 mm.
Ê Standard fans: Reinstall the standard fans (see
Ê Redundant fans: Reinstall the processor fan holder (see
Ê Redundant fans: Reinstall the ventilation duct over the system fans (see
page 41).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
TX200 S3
Conversion standard PS to hot-plug PS
93ff.
Options Guide
page 39).
page 40).
87