Fujitsu Siemens Computers PRIMERGY TX200 S3 Options Manual page 61

Hide thumbs Also See for PRIMERGY TX200 S3:
Table of Contents

Advertisement

Controller in the PCI slots
1
2
Figure 46: Installing a controller
Ê Install the controller in the PCI slot and press it carefully into the associated
plug-in location on the system board (1). Ensure that the rear cover fits into
the recess (a).
Ê Push the green fastening slider over the rear cover's bracket (2).
Ê If required, connect the cables to the controller and other components.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the
chapter "Completion" on page
TX200 S3
Installing a controller (PCI slots 1-4, 10)
a
93ff.
Options Guide
61

Advertisement

Table of Contents
loading

Table of Contents