Clearing Tape Jams In The Reinforcement Unit - Oce 9800 User Manual

Clearing tape jams in the Reinforcement Unit

When a tape jam occurs one of the following messages appears on the display:
'Reinforcing not posible: tape jam' for copy jobs
'Refeed reinforcement tape' for plot jobs.
'Tape jammed in reinforcement unit' for print and copy jobs while the engine
was running.
When a tape jam occurs while the engine is running, the message will be
accompanied by a picture of the engine with the side door of the
Reinforcement Unit blinking (see figure 200).
[200] Tape jammed in reinforcement unit
To clear a tape jam:
Open the front door of the Reinforcement Unit (see figure 201).
1
[201] Opening the front door of the Reinforcement Unit
Problem solving 181