Oce 9800 User Manual page 56

If required, press the function button 'Binding edge'.
7
Set the required binding edge using the higher/lower buttons or the numeric
buttons.
If the optional output unit with punch unit is installed, you can press the
function button 'Binding edge' again to select punching (see 'High capacity
output unit with punch unit (optional)' on page 57).
If the optional reinforcement unit is installed, you can press the function button
'Binding edge' again to select reinforcement (see 'Reinforcement Unit
(optional)' on page 60).
Make other settings as required.
8
Feed the original.
9
Feeding originals with legends to get folded copies
to the fold method Standard or Ericsson, you have to take special consideration
of the place of the legend when feeding the original. If you are feed with the
shortest side first (portrait), ensure that the legend is on the lower left hand side.
When feeding landscape, the place of the legend must be on the upper left hand
side. See illustration 45 on page 56 below.
[45] Feeding originals: portrait with the legend left below, landscape with the legend left above
The place of the legend area of the illustration above is not applicable
Note:
when folding Afnor-like.
When folding Afnor, the place of the legend depends on the size of your
original.
56 Océ 9800 Copier/Printer User Manual
Portrait feeding prints and folds faster than
landscape. Feed your originals face-up and
with the legend in the appropriate position, as
illustrated below.
The place of the legend is important when folding. This picture
shows how to feed originals when folding Standard or Ericsson.
When folding according
drawing
legend