Table of Contents
Advertisement
Clearing staple jams
The stapler is located at the front of the machine and is marked by the symbol
'
'.
maximum quantity that can be stapled is 35 sheets of 20 lb. bond paper, or 50
sheets of 20 lb. bond paper, depending on your machine version.
When a staple jam occurs, users will be requested to call the key operator to
solve the problem. Because procedures to clear jammed staples differ for each
of the types of staplers mentioned above, follow the procedure applicable to
your stapler version.
Clearing a staple jam (35-sheet stapler)
Open the paper compartment door.
1
Slide the frame to the right using the blue handle marked 'A'.
2
Open the top cover of the finisher.
3
If the stapler is fastened, use a screwdriver or coin to unlatch it (see action 1 in
4
figure 82). Once the screw is loosened, you can slide the latch to the rear.
[82] Opening the 35-sheet stapler
Open the stapler by lifting the lever (action 2 in figure 82).
5
104
Océ 31x5E Configuration and special maintenance
The stapler is used for both automatic and manual stapling. The
2
1
latch
Advertisement
Table of Contents
