How To Do A Simple Copy Job - Oce 9800 User Manual

How to do a simple copy job

1. Place your original face-up, left aligned along the original guide. The
original feed table of the scanner accepts originals up to 1050 mm wide.
For folded output, originals should be fed in portrait orientation with the
legend in the bottom left hand side. The folded package will be deposited
face-up (legend visible).
2. Specify the number of copies using the numeric buttons.
3. Specify reduction/enlargement or copy material on the right hand side. Use
the roll selection buttons to select copy material of your choice. You can see
the format of each roll next to the roll selection buttons. Zooming, if required,
will be done automatically.
4. Exposure can be changed at the left hand side. This side of the operating
panel contains finishing buttons as well. By pressing the fold button, for
example, you will get a neatly folded copy.
5. To start the copy job press the green start button
Your original will be fed into the scanner. The printer starts.
6. Collect your output. Your copy will be delivered on the selected output unit
of the print engine.
12 Océ 9800 Copier/Printer User Manual
.