Modifying The Exposure - Oce 9800 User Manual

Make all required scanner settings on the operating panel of the Océ 9800.
3
If you have selected 'with copy', also make other required settings on the
4
operating panel of the Océ 9800.
Feed the original into the scanner.
5
Press the 'Start' button on the operating panel of the Océ 9800.
6
Repeat step 2 to 6 to scan more originals.
7

Modifying the exposure

The automatic exposure control will provide a good quality copy from a large
variety of originals. The automatic exposure setting, which is switched on (by
default), ensures the production of background-free copies of most line
drawings (see figure 114).
Copies:
Ready to copy
0
Image
Special
original
sheet
Copy
material
......................................................................................................................................
Copy
Original
type
size
[114] Automatic exposure setting
Setting the automatic exposure
Open the 'Special original' card in the 'Copy' section.
1
If the function 'Automatic exposure' is shown as in figure 114 above, then the
automatic exposure has been activated already.
If 'Automatic exposure' is deactivated press the function button 'Automatic
2
exposure'.
When scanning extremely light or dark originals, or originals with unequal
background density such as paste ups, the result may not meet your
requirements (e.g. too much background). In such cases you can manually
adjust the exposure.
Scan Station (optional)
Cut&paste
Blueprint
Dark
Photo
Normal
Automatic
type
exposure
................ ................
Machine Program
210 mm
Non-standard
Standard
Filesize
Original
width
optimization
...............
................
Finishing
Copy
123