Clearing original jams
When during copying an original jam occurs, the paper path indicator will start
flashing and the display shows the error message E0.
Clearing an original jam
Switch off the copier.
1
First try to remove the jammed original by pulling it gently towards you with
2
both hands.
In case of a very fragile original:
Open the top cover by pulling it towards you and raising the cover (see
3
figure 26).
2469
[26] Opening the top cover
Remove the original.
4
Close the top cover and push it back until you hear a click.
5
If there is copy material in the copier, clear copy path (see 'Clearing paper
6
jams' on page 42).
Switch on the copier.
7
Solving problems
41