Oce 9800 User Manual page 64

Bin number
a job. Following copies are delivered according to the specification of 'Bin
switching' as explained above. You can select one of the following options:
Automatic
If Bin switching is 'off' or 'Continuous', the printer will use the same bin to
deliver the first copy of a job. Only if Bin switching is 'Continuous' for the
current job but the previous job used another setting, the next bin will be
selected (bin 6 will be followed by bin 1).
If Bin switching is 'Per job' or Per set' the printer will switch to the next bin
to deliver the first copy of a job (bin 6 will be followed by bin 1).
If Bin switching is activated (not 'off') and all bins are empty, bin 1 will be
selected to deliver the first copy of a job.
Manual (numeric)
You can specify the number of the bin that is to be used to deliver the first
copy of a job, using the higher/lower buttons or the numeric buttons.
If Bin switching is activated (not 'off'), this setting will only be used for one
job. After this job is finished, Bin number will be set to Automatic.
If the next bin is selected, and this bin is completely full, printing is
Note:
stopped (regardless the contents of other bins).
To prevent the printer from stopping, you can empty bins that are not in
Note:
use, without interrupting the print process.
Selecting settings for High Capacity Stacker
Open the 'High cap. stacker' card in the 'Finishing' section.
1
If required, press the 'Offset stack' button to select or deselect this option.
2
Select the required bin switching method, by pressing the button
3
'Bin switching' (see figure 56).
Prints:
Ready to print
0
High cap.
stacker
Stamp
Fold
delivery
Fold
[56] Settings for High Capacity Stacker
64 Océ 9800 Copier/Printer User Manual
You can specify which bin is to be used to deliver the first copy of
Folding
length
................ ................
Machine Program
Continuous
Per Set
Per Job
Offset Bin
switching
stack
................
................
Copy
Finishing
2
Automatic
Bin
number