Introduction - Oce 9800 User Manual

Introduction

Problems that may occur with the Océ 9800 consist of:
Original jam (see page 157)
Paper jams (see page 159)
Problems with the Reinforcement Unit (see page 178)
Problems which can be solved by following the instructions on the display
Other problems (Call Océ service) (see page 184)
When an error occurs, the display informs you about
what the problem is
where it has occurred
how to solve it
Copy material and originals are normally transported through the system
without any problem. However, paper may get stuck. If this happens, a flashing
cover or door will be displayed on the graphic display, indicating in which part
of the system the paper has jammed.
Copies:
Check machine
0
Open roll unit and doors
Remove copy material
Close roll unit and doors
[158] Example of an error message
Stickers on some parts of the system indicate which green handles, green
knobs, green bars and covers, etc. are to be lifted, pressed or opened to remove
any jammed paper.
The display guides you through a sequence of steps to solve the problem. If a
jam occurs in more than one location, the display will continue to instruct you
until all jammed paper has been removed.
Once the error has been cleared, the display will give you instructions on how
to continue the job in such a way that all copies are correctly produced.
156 Océ 9800 Copier/Printer User Manual