Switching On And Off - Oce 9800 User Manual

Switching on and off

The Océ 9800 can be switched on by hand, or switched on automatically by
the time switch. The setting of the time switch is set by the key operator. The
on/off timer switch with the key is located on the scanner (see figure 1). Turn
this key to the 'timer' position if you want it to switch on and off automatically.
Your key operator can program the time switch to switch on the system each
day of a work week at a specified time. This can be quite handy because the
warm-up time of the system will be approximately 20 minutes. By activating
the timer you'll find the system ready for use, when you are.
The on/off timer switch has three settings:
on: the system is switched on.
off: the system is switched off.
timer: the system will be switched-on automatically at a time of your choice
and switched-off after a certain idle time.
[1] On/off switch with key and timer position
Switching on
Turn the key to 'on' position.
1
The system takes about 20 minutes to warm up. As soon as the system is
warmed up, the message 'Ready to copy' appears.
Switching on the timer
Turn the key to 'timer' position.
1
10 Océ 9800 Copier/Printer User Manual
off
on
timer