Oce 9800 User Manual page 87

Erasing part of the image
Open the 'Image' card in the 'Copy' section.
1
Decide whether to delete inside or outside an area (see figure 82).
2
Press the function button 'Edit' until you have selected 'Erase'.
3
Copies:
Roll 2
Ready to copy
0
Image
Special
original
Copy
material
Autoshift
......................................................................................................................................
Copy
Edit
size type
[82] Erasing part of an original
Measure the width and height of the area and determine the position of the left
4
and the top of the area. That is, the distance from the left from the top of the
original.
Press the function button 'Area' to select 'Inside' or 'Outside'.
5
Press the function button 'Position' to select the 'Top' and 'Left' position and
6
enter the required values using the numeric or the higher/lower buttons.
Press the function button 'Size' to select the 'Height' and 'Width' and enter the
7
required values using the numeric or the higher/lower buttons.
Make other settings as required.
8
Feed the original.
9
Special copy jobs
Stretch
Erase
Shift
Mirror
................ ................
Machine Program
Outside
Inside
Area Position
................
................
Finishing
Copy
Left Width
0 mm 0 mm
Top
Height
0 mm
100 mm
Size
87