Figure 13-1. Optional X-Slot Cards; Lansafe Power Management Software; Remote Notification - Eaton Powerware 9390 Installation And Operation Manual

Communication
LAN and telephone drops for use with X-Slot connectivity cards must be provided by
facility planners or the customer.
For installation and setup of an X-Slot card, please contact Powerware (see page 1-6). Refer
to the manual supplied with the X-Slot card for user instructions.
ConnectUPS-X Web/SNMP Card
Relay Interface Card

13.2 LanSafe Power Management Software

Each Powerware 9390 UPS ships with LanSafe Power Management Software. To begin
installing LanSafe software, see the instructions accompanying the Powerware Software
Suite CD.
LanSafe software uses an RS-232 serial link to communicate with the UPS. The software
provides up-to-date graphics of UPS power and system data and power flow, a complete
record of critical power events, and notification of important UPS or power information.
With custom views for monitoring status and metering information, various user groups
can select the most useful view for their specific needs.

13.3 Remote Notification

For connection and setup of a modem, or to enable Remote Notify and Call Home features
within the UPS, please contact Powerware (see page 1-6).
Remote Notification provides the UPS with the capability to use a standard off-the-shelf PC
modem as a telephone interface. The features provided by this option are:
Call a remote terminal or pager based on programmable events and alarms
Four separate, programmable notification groups (phone numbers)
Automatic answering (user-configurable) for access to the Terminal mode of the UPS
Remote and local ability to clear Call Out alarms and events
Error detection and correction for misconfigured and disconnected modems.
Remote Notification provides the user with the option of receiving alarms and notices at a
remote location. Using the Terminal mode, the user calls the UPS to perform basic
monitoring. In the event of a UPS alarm or notice, the user is notified at the remote
location. The UPS calls through the modem to the user's computer or pager and leaves a
message.
13-2
EATON Powerware
Modbus Card

Figure 13-1. Optional X-Slot Cards

9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev E powerware.com
®
Modem Card
Powerware Hot Sync
CAN Bridge Card
Industrial Relay Card